Model 2701 User’s Manual Close/Open Switching Module Channels 2-3
WARNING Careless multiple channel operation could create an electric shock
hazard that could result in severe injury or death. Improper operation
can also cause damage to the switching modules and external circuitry.
Multiple channel operation should be restricted to experienced test
engineers who recognize the dangers associated with multiple channel
closures.
NOTE The Model 2701 can scan switching module channels. Each channel in the scan
can have its own unique setup configuration. Scanning is covered in Section 7.
NOTE When a setup is saved as a user setup (SAV0, SAV1, SAV2, SAV3, or SAV4),
closed channels are also saved. When the setup is restored, those channels (and
only those channels) will be closed (see “Defaults and user setups,” page 1-22).
To Next Page
Loading...
