Keysight Technologies B2900 Series User Manual

Keysight B2900 User’s Guide, Edition 5 2-13
Introduction
Source/Measure Unit
Table 2-3 Voltage Output Range
a. Table 2-4 shows the limitations when using Channels 1 and 2 for DC output or Pulsed output
with 50 s  t  t
max
(=99.9999 ks).
b. Maximum base current is 500 mA for the pulse with 50 s  t  1 ms, and 50 mA for the pulse
with 50 s  t  2.5 ms or 50 s  t  10 ms.
c. Maximum duty cycle is 99.9999 % for the pulse with 50 s  t  t
max
, and 2.5 % for the pulse
with 50 s  t  1 ms, 50 s  t  2.5 ms, or 50 s  t  10 ms.
d. Available for the B2911A and B2912A. Not available for the B2901A and B2902A.
Range
value
Setting resolution
DC output voltage
or pulse peak/base
voltage
Maximum current
a
a. Table 2-4 shows the limitations when using Channels 1 and 2 for DC output or Pulsed output
with 50 s  t  t
max
(=99.9999 ks).
Pulse width t
b
b. Maximum duty cycle is 99.9999 % for the pulse with 50 s  t  t
max
, and 2.5 % for the pulse
with 50 s  t  1 ms, 50 s  t  2.5 ms, or 50 s  t  10 ms.
B2901A
B2902A
B2911A
B2912A
DC
output
Pulsed
output
0.2 V 1 V0.1 V0  |V|  0.21 V 3.03 A 3.03 A with 50 s  t  t
max
10.5 A with 50 s  t  1 ms
2 V 10 V1 V0  |V|  2.1 V
20 V 100 V10 V0  |V|  6 V
6 V < |V|  21 V 1.515 A 1.515 A with 50 s  t  t
max
200 V 1 mV 100 V0  |V|  6 V 3.03 A 3.03 A with 50 s  t  t
max
10.5 A with 50 s  t  1 ms
6 V < |V|  21 V 1.515 A 1.515 A 50 s  t  t
max
21 V < |V|  210 V 105 mA 105 mA
0  |V|  180 V
―
1.05 A 50 s  t  10 ms
0  |V|  200 V
―
1.515 A 50 s  t  2.5 ms

Keysight Technologies B2900 Series Specifications

General

Brand	Keysight Technologies
Model	B2900 Series
Category	Measuring Instruments
Language	English