Keysight Technologies J-BERT M8020A - Page 213

Keysight M8070A Programming Guide 213
SCPI Command Reference 5
This subnode has the following commands:
Table 50
Name Description under
:UNIT[?] :OUTPut:DEEMphasis:UNIT[?] on page 214
:PRESet[?] :OUTPut:DEEMphasis:PRESet[?] on page 214
:PRESet:ENABle[?] :OUTPut:DEEMphasis:PRESet:ENABle[?] on
page 215
:SELect:PRESet[?] :OUTPut:DEEMphasis:SELect:PRESet[?] on
page 215
:PRECursor{1:2}[?] :OUTPut:DEEMphasis:PRECursor(*)[?] on
page 217
:POSTcursor{1:5}[?] :OUTPut:DEEMphasis:POSTcursor(*)[?] on
page 217
:CONFigure:SIGN[?] :OUTPut:DEEMphasis:CONFigure:SIGN(*)[?]
on page 218
:CURSor:MAGNitude(0|1|2|3|4|5|6|
7)[?]
:OUTPut:DEEMphasis:CURSor:MAGNitude(
0|1|2|3|4|5|6|7)[?] on page 219
:CURSor:MAIN:AUTO[?] :OUTPut:DEEMphasis:CURSor:MAIN:AUTO[
?] on page 220
:CURSor:MAIN:SUFFix? :OUTPut:DEEMphasis:CURSor:MAIN:SUFFi
x? on page 221