Keysight Truevolt Series User Manual

SYSTem:COMMunicate:LAN:GATeway "<address>"
SYSTem:COMMunicate:LAN:GATeway? [{CURRent|STATic}]]
Assigns a default gateway for the instrument. The specified IP Address sets the default gateway, which
allows the instrument to communicate with systems that are not on the local subnet. Thus, this is the
default gateway where packets are sent that are destined for a device not on the local subnet, as determ-
ined by the Subnet Mask setting. Contact your LAN administrator for details.
If you change this setting, you must send SYSTem:COMMunicate:LAN:UPDate to activ-
ate the new setting.
Parameter Typical Return
Command: "nnn.nnn.nnn.nnn". Default: "0.0.0.0".
Query: {CURRent|STATic}. Default: CURRent.
"198.105.232.1"
Set default gateway address:
SYST:COMM:LAN:GATEWAY "198.105.232.1"
SYST:COMM:LAN:UPD
l
CURRent: returns address currently being used by the instrument.
l
STATic: returns static address from non-volatile memory. This address is used if DHCP is disabled or
unavailable.
l SYSTem:SECurity:IMMediate sets this parameter to its default value.
l On the 34460A, this requires option 34460A-LAN or option 3446LANU.
l If DHCP is enabled (SYSTem:COMMunicate:LAN:DHCP ON), the specified default gateway is not used.
However, if the DHCP server fails to assign a valid IP address, the currently configured default gateway
is used.
l This setting is non-volatile; it is not changed by power cycling, a Factory Reset (*RST), or an Instru-
ment Preset (SYSTem:PRESet).
SCPI Programming Reference
410
Keysight Truevolt Series Operating and Service Guide

Keysight Truevolt Series Specifications

General

Brand	Keysight
Model	Truevolt Series
Category	Measuring Instruments
Language	English