A75UM3EE (Ver. E.2)
3-86
[References]
1. If the Date Stamp Mode is valid, the Date Stamp is printed in each Re-copy, Set Copy, Concurrent
Print and Sample Copy.
The time that is printed is decided for each of these copy methods as follows.
Re-copy The time you start scanning the stored image data pushing the Start
Key (Not the time you pushed the Re-copy Key)
Set Copy The time you pushed the Start Key to print out the Set Copy Job
Concurrent Print The time you pushed the Start Key to scan the original
Sample Copy The time you pushed the Sample Key
2. Followings are examples of Date Stamp in each function and mode.
The main position of Date Stamp is “left front” for all of the following examples.
(a) Rotate Mode
Date Stamp is also rotated.
(b) Mirror Image Mode
Date Stamp is also mirrored.
KIP
SCANNER
1999/01/31
KIP
SCANNER
SCANNER
KIP
To Next Page
Loading...
