A75UM1E1 (Ver. E.2)
1-4
1.4 Specifications
Model KIP2050, KIP2080, KIP2120 or KIP2160
Scanning method Sheet through type
Reading sensor Silicone-CCD
Light source Cold Cathode Ray Tube
Maximum reading width 914.4mm
Reading speed KIP2050 : 50.95mm (per a second)
KIP2080 : 80mm
KIP2120 : 120mm
KIP2160 : 160mm
Resolution 400DPI
Tone Line, Line/Photo and Photo
Interface KIP IF- 8 (For printer)
RS232C
SCSI-2 (Option)
Memory capacity From 64MB (standard) to 320MB (option)
Power consumption 190W
Environmental conditions Temperature
From 10 to 32.5 degrees centigrade
Humidity
From 20% to 80% (No dew)
Acoustic noise Less than 60db
Outer dimension 1,368mm (Width) x 489mm (Depth) x 266mm (Height)
Weight About 76kg
Power source Voltage
From 100 to 240V plus or minus 10%
Note : Scanner’s voltage condition is automatically corresponded
to the voltage of outlet (from 100V to 240V) if only you
connect the power plug.
Frequency
50 or 60Hz
Original thickness 0.05mm to 1.6mm (50g to 120g/centare)
Note : When you scan an original which is thicker than 0.12mm,
make sure to select 50% or larger zoom ratio.
Note : We may change these specifications without noticing to you.
To Next Page
Loading...
