KIP 2080 - Horizontal Shift and Vertical Shift of Date Stamp

A75UM3EE (Ver. E.2)
3-92
3.7.4 Horizontal shift and vertical shift of Date Stamp
[Function]
After deciding the main position of Date Stamp, it is possible to shift the Date Stamp horizontally
(X shift) and vertically (Y shift).
(Example of use)
If Date Stamp and copy image overlap each other and it is hard to distinguish between them,
for example, shift the Date Stamp.
[Range of shift]
When the rotation of Date Stamp is “0 degree” or “180 degree” and when it is placed at each main
position, the horizontal range (X) is from -1.00 inch to +1.00 inch, and the vertical one (Y) is from
-0.50 inches to +0.50 inches.
Namely, you can place the Date Stamp anywhere in the gray zone of the following figure.
Y/M/D
Y/M/D
Horizontal shift (X)
Vertical
shift (Y)
Copy




+1.00 inch
1.00 inch
+0.50 inches
0.50 inches
+1.00 inch
1.00 inch
+0.50 inches
0.50 inches
+1.00 inch
1.00 inch
+0.50 inches
0.50 inches
+1.00 inch
1.00 inch
+0.50 inches
0.50 inches
In 1999, it was
2000/Jan/01
In 1998, it was
In 1997, it was
In 1996, it was
In 1999, it was
2000/Jan/01
In 1998, it was
In 1997, it was
In 1996, it was