A75UM1E1 (Ver. E.2)
1-13
1.10 Scan Mode
[Function]
Scan Mode is a mode to send the scanned image data to the computer.
We have a scanning software “Kip Scan Client” which is corresponded to the scanner K-75
series.
Also it is available to use another scanning software.
As for the operation, please refer to the corresponding user’s manual.
Note : You have to connect the scanner with the computer and several devices by the SCSI Cable if
you wish to use the Scan Mode.
As for the settings for SCSI, refer to “SCSI” on the page 3-165.
To Next Page
Loading...
