A75UM3EF (Ver. E.2)
3-101
If you push the Start Key, the stored Set Copy Job is printed out from the printer depending on your set
copy setting.
It is possible to store new Set Copy Jobs in the memory by scanning originals when the printer is
printing out the former Set Copy Job.
When the printer has finished to print out the former Set Copy Job, it starts printing out the next Set
Copy Job.
Note : Even if the capacity of memory is enough, the maximum storable number of Set Copy Job or
image data is restricted as follows.
1. Maximum storable number of image data in 1 Set Copy Job is 99 image data (99 originals).
2. Maximum storable number of Set Copy Job in the Memory is 99 Set Copy Jobs.
3. When some Set Copy Jobs already exist in the memory, how many image data the memory
can store more is not constant but is variant according to the numbers of existent Set Copy
Job and image data.
It can be shown by the following formula.
200 – Number of present Set Copy Job – Number of present all image data
– Number of Set Copy Job you will create = Maximum number of image data
(Example)
Memory has 2 Set Copy Jobs at present.
The 1st one has 99 image data and the 2nd one has 60 image data.
If you create 1 more Set Copy Job, you can scan 38 originals. (200 - 2 - (99+60) - 1 = 38)
If you create 2 more Set Copy Jobs, you can scan 37 originals. (200 - 2 - (99+60) - 2 = 37)
To Next Page
Loading...
