Advanced editing of the Sound sets |159
Activating and choosing the insert effects
Each Sound can go to one or more insert effect processors.
Activate the insert effects
1 Go to the Mixer/Tuning > Insert FX page.
FX group
FX on/off
Selected FX
type
2 Turn on or off the insert effect(s) assigned to a Sound.
Choose the insert effects
1 While in the Insert FX page, touch the name of the selected effect type, or
the ‘x’ symbol under the On/Off button, to open the FX Edit page.
Selected FX
FX edit parameters
2 Use the pop-up menu on top of the page to choose an effect.
3 If needed, edit the effect parameters, as described in the part of the manual
dedicated to the Effects.
You can adjust the Wet/Dry mix of the insert effects, but we suggest not to
touch it, unless you are editing the effects.
4 When finished editing, press the EXIT button to return to the previous page.
To Next Page
Loading...
