160| Customizing and editing the Sound sets
Activating and choosing the insert effects for the Drum Families
On Drum tracks, you can access a separate Drum mixer, and add insert ef-
fects to each Drum Family. The Drum channel is then sent to the main mixer,
and can use the channel’s insert effects.
1 Go to the Mixer/Tuning > Insert FX page.
2 Press the TRACK SELECT button to cycle between the tracks, and find the
Drum track.
DF (Drum Family)
button in the
Drum track
3 Touch the DF button to access editing the Drum Families of the correspond-
ing Drum track.
Name of the Drum Families
Selected track
4 On each Drum Family strip, use the various controls to activate/deactivate
and select the insert effects.
5 When finished editing, touch the DF button again to exit the editing page.
To Next Page
Loading...
