Korg PA1000 - Page 363

Editing the MIDI Songs |351
7 After having set the various parameters, touch Execute.
Cutting or inserting measures
You can delete a selected measure (or a series of measures), or insert new
ones in the middle of the Song.
1 Go to the Sequencer > Song Edit > Cut/Insert page.
2 Use the Start parameter to select the first measure to be cut or inserted.
3 Use the Length parameter to choose the number of measures to be cut or
inserted.
4 Use the Meter parameter to set the meter (time signature) of the measure
to be inserted.
5 After having set the various parameters, touch Execute.