458| Customizing and editing the Sounds
1 While in any of the Sample or Multisample pages, choose the Import com-
mand from the page menu, to open the Load Sample window.
While in this window, you can press the SEARCH button, and use the Search
function to find files in the various media.
2 Browse through the files, then select the one to load, and touch the Load
button.
Imported Sounds, multisamples and sample are automatically stored in the
internal memory, and will not be lost when turning the instrument off.
When importing a multisample, take note of its name; you will need it in
Sound mode, when assigning the multisample to a new Sound.
Importing PCG files
When importing a PCG file, you can choose between a single Program or a
whole bank:
▪ Choose Program to choose a single Program (corresponding to a Pa-Series
Sound); touch the Program number and dial in the corresponding number.
Choose a target Sound location where to load the imported Program.
▪ Choose Bank to import all the Programs from the selected bank. Touch
the Sound Bank name to choose a target bank where to load the imported
Programs.
Due to the differences between Pa1000 and the older KORG instruments,
some differences may arise during conversion. When reading a PCG file,
Pa1000 tries to use exactly the same multisamples as in Triton. If this is not
possible, it looks for a similar multisample. If this is also not possible, an
<empty> multisample will be selected. Go to the Sound mode, and select a
multisample suitable for the imported Program.
Not all Triton’s PCG data are imported. Insert FX, EQ, Arpeggio, Combi,
Global and Drum Kit data are not loaded.
To Next Page
Loading...
Need help?
General
