Making new sounds with Sampling |459
Importing SF2 files
When importing an SF2 file, you can choose between a single multisample
or the whole bank:
▪ Choose MultiSample to choose a single Multisample (that is, SF2 Instruments);
touch the multisample number and dial in the corresponding number.
▪ Choose Complete bank to import all the multisamples from the selected
bank.
Check Override Sample Names if you want to assign the sample names a
progressive number. In this case, when importing a multisample whose name
is, for example, ‘Piano’, you will have all samples renamed as ‘Piano_001’,
‘Piano_002’, and so on.
Freeing memory
If you get a messages warning there isn’t enough memory to load all samples
or resources, return to the main Sampling page and choose the Delete com-
mand from the page menu to clean the sample memory, then retry. Please
note that importing single multisamples is the safest way to avoid filling the
memory with unnecessary data.
As an alternative, you can compress some or all the samples in memory, as
described later in this chapter.
To Next Page
Loading...
