528| Audio In/Out, Voice and Guitar Processor
Choosing a Voice/Guitar Preset
Voice/Guitar Presets can be selected by sending a series of messages on the
MIDI channel assigned to the Guitar Processor.
▪ Control Change #00 (Bank Select MSB) message with value ‘0’.
▪ Control Change #32 (Bank Select LSB) message to choose the type of pre-
set.
Type of Preset CC32 Value
Factor y 0
User 1
Local 2
▪ Program Change message to choose the preset.
Preset PC Number
Preset 1…64 0…63
If your controlling device can only send Program Change messages, manu-
ally select the type of preset (Factory, User, Local).
Controlling the guitar input volume
You can control the level of the signal entering the Guitar Processor by us-
ing the Control Change #07 (Volume) message. (This does not work with the
Voice Processor).
Turning the guitar effects on/off
Each of the effects in a Guitar Preset can be turned on or off, by sending a
Control Change message on the Guitar Processor MIDI channel. (This does
not work with the Voice Processor).
FX On/Off CC Number
FX1 80
FX2 81
FX3 82
To Next Page
Loading...
