Using the effects and voice harmonization |529
Live control of the guitar effect parameters
You can control a guitar FX parameter via MIDI, by using one of the MIDI
pedalboard pedals.
Please note that when a pedalboard has two pedals or more, its leftmost
pedal usually sends the Volume control (CC#07).
1 Be sure your pedalboard is sending data on the same MIDI channel of the
Pa1000’s Guitar Processor.
2 Program one of the pedals to transmit the MIDI Control Change message
you prefer.
3 Access editing of the Guitar Processor effect you want to use. Assign to the
Src parameter the same MIDI CC number as the programmed pedal.
4 Try the effect with your pedalboard, and adjust the Amt parameter depend-
ing on the results.
5 Press the EXIT button to return to the FX page, then choose the Write Guitar
Preset command from the page menu to save the preset.
To Next Page
Loading...
