600| Effects for the Sounds, Voice, Guitar
a L Delay Time [msec] 0…5460 Sets the delay time of TapL
Level 0…50 Sets the output level of TapL
b C Delay Time [msec] 0…5460 Sets the delay time of TapC
Level 0…50 Sets the output level of TapC
c R Delay Time [msec] 0…5460 Sets the delay time of TapR
Level 0…50 Sets the output level of TapR
d Feedback (C Delay) –100…+100 Sets the feedback amount of TapC
Src Off…Tempo Selects the modulation source for the
TapC feedback
Amt –100…+100 Sets the modulation amount of the TapC
feedback
e High Damp [%] 0…100 Sets the damping amount in the high
range
Low Damp [%] 0…100 Sets the damping amount in the low
range
f Input Level Dmod [%] –100…+100 Sets the modulation amount of the input
level
Src Off…Tempo Selects the modulation source for the
input level
g Spread 0…50 Sets the width of the stereo image of the
effect sound
h Wet/Dry Dry, 1:99…99:1,
Wet
Balance between the wet and dry signal
Src Off…Tempo See DMS (Dynamic Modulation Source)
Amt –100…+100 Amount of modulation source
To Next Page
Loading...
