Korg PA1000 - Page 613

Effect parameters |601
St/Cross Long Delay (Stereo/Cross Long Delay)
This is a stereo delay, and can by used as a cross-feedback delay effect in
which the delay sounds cross over between left and right by changing the
feedback routing. You can set a maximum of 2,730msec for the delay time.
Delay
Delay
Stereo/Cross
Left
Right
Feedback
FX Amt
FX Amt
Stereo In - Stereo Out
Input Level D-mod
Input Level D-mod
High DampLow Damp
High Damp
Low Damp
Spread
Stereo/Cross
a Stereo/Cross Stereo, Cross Switches between stereo delay and
cross-feedback delay
b L Delay Time [msec] 0.0…2730.0 Sets the delay time for the left channel
c R Delay Time [msec] 0.0…2730.0 Sets the delay time for the right channel
d L Feedback –100…+100 Sets the feedback amount for the left
channel
Src Off…Tempo Selects the modulation source of feed-
back amount
Amt –100…+100 Sets the modulation amount of the left
channel feedback
e R Feedback –100…+100 Sets the feedback amount for the right
channel
Amt –100…+100 Sets the modulation amount of the right
channel feedback
f High Damp [%] 0…100 Sets the damping amount in the high
range
g Low Damp [%] 0…100 Sets the damping amount in the low
range
h Input Level Dmod [%] –100…+100 Sets the modulation amount of the input
level
Src Off…Tempo Selects the modulation source for the
input level
i Spread –50…+50 Sets the width of the stereo image of the
effect sound