Korg PA1000 User Manual

646| Effects for the Sounds, Voice, Guitar
a: OSC Mode
This parameter determines whether or not the oscillator frequency follows
the note number.
a: Pre LPF
This parameter enables you to set the damping amount of the high range
sound input to the ring modulator. If the input sound contains lots of har-
monics, the effect may sound dirty. In this case, cut a certain amount of high
range.
b: Fixed Frequency [Hz]
This parameter sets the oscillator frequency when “OSC Mode” is set to
Fixed.
c: Note Offset
c: Note Fine
These parameters for the oscillator are used when “OSC Mode” is set to Note
(Key Follow). The “Note Offset” sets the pitch difference from the original
note in semitone steps. The “Note Fine” parameter fine-adjusts the pitch
in cent steps. Matching the oscillator frequency with the note number pro-
duces a ring modulation effect in the correct key.
Organ Vib/Chorus (Organ Vibrato/Chorus)
This effect simulates the chorus and vibrato circuitry of a vintage organ. The
modulation speed and depth can be customized.
+
Vibrato/Chorus
Mode
Preset Setting
Custom Parameters
Left
Right
FX Amt
FX Amt
FX Amt = 100: Mono In - Mono Out / FX Amt = 0: Stereo In - Stereo Out
a Input Trim 0…100 Sets the input level
b Control Mode Preset,
Custom
Selects either preset or custom settings

Korg PA1000 Specifications

General

Sound Engine	EDS-X (Enhanced Definition Synthesis-eXpanded)
Polyphony	128 voices
Keyboard	61 keys with velocity and aftertouch
Display	7-inch TFT display
Song Player	MP3, SMF (Standard MIDI File), KAR
Storage	960 MB
Connectivity	USB, MIDI, Audio In/Out
Weight	10.75 kg (23.7 lbs)
Effects	148 effect types
Sounds	Over 1, 750 Factory Sounds, 107 Drum Kits
User PCM Sample Memory	600 MB
Style Tracks	8 tracks
Chord Sequencer	Yes
Pads	4 Assignable Pads
Lyrics	MID, KAR, MP3+Lyrics
Sequencer	16 tracks
SongBook	Fully programmable music database
Multi Pad	4 Assignable Pads
Connections	Audio In, Line Out
Clock	Internal
Power Supply	AC adapter