Korg PA1000

654| Effects for the Sounds, Voice, Guitar
h Wet/Dry Dry, 1:99…99:1,
Wet
Sets the Balance between the wet and
dry signal
Src Off…Tempo Selects a modulation source for Wet/Dry
Amt –100…+100 Sets the modulation amount for Wet/Dry
a: Envelope Select
This parameter selects whether the left and right channels are linked to
control both signals simultaneously, or whether each channel is controlled
independently.
b: Sensitivity
g: Output Level
The “Sensitivity” parameter sets the sensitivity of the compressor. If this
parameter is set to a higher value, lower level sounds will be boosted. With
a higher Sensitivity, the overall volume level is higher. To adjust the final
volume level, use the “Output Level” parameter.
Sensitivity=100
Sensitivity=40
Dry
Wet
Time
Level
Compressor - Sensitivity
Louder
c: Attack
This parameter controls the attack level.
Dry
Wet
Time
Level
Attack=80
Attack=20
Compressor - Attack