Effect parameters |655
Dyn. Compressor (Dynamic Compressor)
This effect reduces the dynamic range of the input signal, to regulate the lev-
el and give a ‘punchy’ effect. It is useful for guitar, piano, and drum sounds.
This is a true stereo effect; you can link the left and right channels, or use
each channel separately.
Left
Right
FX Amt
FX Amt
Stereo In - Stereo Out
EQ Trim
EQ Trim
LEQ HEQ
LEQ
HEQ
Compressor
Compressor
Envelope Select
Output Level
Output Level
Envelope - Control
Envelope - Control
a Sensitivity 1…100 This controls the amount of compression.
Increasing the value boosts lower level
sounds, and raises the overall volume.
To adjust the final volume, use the Level
parameter.
b Attack 1…100 Sets the attack level
c Level 0…100 Sets the output level of the compressor
Src Off…Tempo Selects the modulation source for the
compressor output level
Amt –100…+100 Sets the modulation amount for the com-
pressor output level
d Wet/Dry Dry, 1:99…99:1,
Wet
Sets the Balance between the wet and
dry signal
Src Off…Tempo Selects a modulation source for Wet/Dry
Amt –100…+100 Sets the modulation amount for Wet/Dry
To Next Page
Loading...
