Korg PS60 - Connecting the PS60 to a computer

Performance Edit
8
WiththeMNorLGTsettings,theProgram’ssettingwill
determinethepriorityofthenotethatsoundswhenyou
playtwoormorenotes.
OSC Select [BTH, OSC1, OSC2]
Thisparameterspecifieswhetherthetimbre’sprogramwill
playOSC1,OSC2,orboth.
Forprogramswhose“OscillatorMode”isDouble,thisset‐
tingletsyouspecifythatonlyOSC1orOSC2willsound.
BTH(Both):OSC1and2willsoundasspecifiedbytheset‐
tingsoftheprogram.
OS1:OnlyOSC1willsound.
OS
2:OnlyOSC2willsound.Programswillnotsoundif
OscillatorModeissettoSingleorDrums.
Portamento [PRG, Off, 001...127]
Thisparameterallowsyoutoselectportamentosettingsfor
eachtimbre.
PRG:Portamentowillbeappliedasspecifiedbythepro‐
gramsettings.
Off:Port amentowillbeoff,eveniftheoriginalprogramset‐
tingsspecifiedPortamentotobeon.
001…127:Portamentowillbeappliedwiththeportamento
timeyouspecifyhere,evenifitistu
rnedoffbytheprogram
settings.
Ifthe“Status”(page7)issettoINT,CC#05(porta‐
mentotime)andCC#65(portamentoswitch)messages
willbereceivedandwillcontrolandchangetheseset‐
tings.(IfthesettingisPRG,CC#05,portamentotime
willnotbereceived.)Thesemessag
eswillbereceived
ontheMIDIchannelspecifiedforeachtimbrebyMIDI
Channel(page7).
Pitch/Other
Main Timbres (A. Piano–Synth):
Sub Timbres (A. Piano–Synth):
Hereyoucanadjustpitchandscalesettingsforeachtimbre.
Pitch
Transpose [–60...+00...+60]
Thisparameteradjuststhepitchofeachtimbreinsemitone
steps.12unitsequaloneoctave.
When“Status”isINT,thisparameterwillaffectthe
pitchessoundedbythePS60.When“Status”isEXT,
thisparameterwillaffectthenotenumbersoftheMIDI
notemessagesthataretransmitted.Forexampleifyo
u
createsettingsof+04and+07respectivelyfortwotim‐
bresthataresettoEXT,playingtheCkeywilltransmit
aCnotenumberontheglobalMIDIchannel,andatthe
sametimewillalsotransmitEandGnotenumberson
theMIDIchannelsofthosetimbres.
Detune [–1200...+0000...+1200]
Thisparameteradjuststhepitchofeachtimbreinone‐centunits.
+0000:Normalpitch.
TransposeandDetunecanbecontrolledbyreceiving
MIDIRPNmessages.ReceivedMIDIRPNCoarseTune
messageswillcontrolTranspose,andFineTunemes‐
sageswillcontrolDetune.
Bend Range [PRG, –24...+00...+24]
Specifiesthemaximumamountofpitchchange(insemi‐
tones)thatwilloccurwhenthepitchbenderisused.
PRG:Thepitchrangespecifiedbytheprogramwillbe
used.
–24…+24:Thissettingwillbeusedregardlessofthesetting
intheprogram.
TheMIDIRPNPitchBendChangemessagecanbe
receivedtoco
ntrolthisandchangethesetting.(How‐
everitwillnotbereceivedifthisparameterissetto
PRG.)Thismessage isreceivedontheMIDIchannelfor
eachtimbresetbyMIDIChannel(page7).
Pitch
Use Prog Scale [Off, On]
AtimbrecanusethescalethatisspecifiedbyScale(page22).
On:Thescalespecifiedbytheprogramwillbeused.
Off:Thescalespecifiedby“Type”(page7)willbeused.