Korg PS60 - MFX;EQ (Master Effect;Eq)

MFX/EQ (Master Effect/EQ) IFX
65
MFX/EQ (Master Effect/EQ)
Here,youcanadjustthesettingsforthemastereffectsand
EQ.Forinstance,youcan:
•Routeasoundtothemastereffects
• MakedetailedsettingsforthemastereffectsandEQ
Formoreinformation,pleasesee“EffectGuide” onpage 79.
TheIFXandMFX/EQtabpagesallowyoutoeditallofth
e
effectparametersthatcannotbeeditedfromthePS60itself.
Parameternamesshowninpurplearetheeffectparameters
thatcanbeeditedfromthePS60.
MFX&EQ Routing
Hereyoucanspecifythetypeofmastereffects,andturn
themon/off.ThemastereffectsaresenttotheL/Rbus.
MFX1, MFX2
Themastereffectdoesnotoutputthedirectsound(Dry).
Adjustthe“Return1”and“Return2”returnlevelstoreturn
thesignaltotheL/RbusandmixitwiththeL/Rbussignal.
Themastereffectsarestereo‐in/out,butdependingonthe
selectedeffecttype,theoutputmaybemo
naural.
Formoreinformation,pleasesee“In/Out”onpage 81.
On/Off [Off, On]
Thisswitchesthemastereffect1on/off.Whenoff,theout‐
putwillbemuted.Thiswillalternatebetweenonandoff
eachtimeitispressed.
Separatelyfromthesettingshere,youcanusecontrol
change#94toturnmastereffects1and2off.Avalueof
0turnsthemof
f,andvaluesof1–127restoretheorigi‐
nalsetting.TheglobalMIDIchannelspecifiedby
“MIDIChannel”(page72)isusedforthismessage.
MFX1 [No Effect, Stereo Chorus, Stereo Flanger,
Vintage Cho/Flg, Stereo Phaser]
MFX2 [No Effect, Hall, Plate, Room, Delay]
Theseselecttheeffecttypeforeachmastereffect(page 117,
page119).Clicktheeffecttype,andchoosefromthelistthat
appears.
IfyouchooseNoEffect,theoutputfromthemastereffect
willbemuted.
Return 1 [000...127]
Return 2 [000...127]
Thesespecifiesthereturnlevelfromthemastereffecttothe
L/Rbus(afterwhichitpassesthroughEQ,andissentfrom
OUTPUTL/MONO andR).
Chain
Mastern FX Chain [Off, On]
On:Mastereffects1and2willbeconnectedinseries,inthe
orderofmastereffect1→ mastereffect2.
Chain Level [000...127]
WhenthechainisOn,thissetsthelevelwherethesoundis
sentfromthefirstmastereffecttothenextmastereffect.
Ifyouselectadouble‐sizeeffect,the“Chain”settings
willbeignored.