Korg PS60 - UTILITY Command

UTILITY Command
77
UTILITY Command
Procedure for utility commands
1. ClicktheUTILITYbutton,andchooseacommandfrom
themenuthatappears.
2. Adjustthesettingsinthedialogbox.
Fordetailsonthecontentsofeachdialogbox,refertothe
explanationforeachcommand.
3. ClicktheOKbuttontobegin,,orclicktheCancelbutton
ifyoudecidenottocontinue.
Write Global Setting
ThiscommandwritesGlobalmodesettings.
Copy Scale
Thiscommandcopiesdatafromapresetscaletoauserscale
orcopiesauserscaletoanotheruserscalelocation.
Fordetailsonthepresetscales,pleaseseeType(page22).
1. UsetheFromfieldtoselectthecopy‐sourcescale.
IfyouselectPureMajororPureMinor,specifytheKey
(locatedattheright)aswell.
Stretchcannotbeselectedif“To”isUserAllNotesScale.
2. InTo,selectsthecopydestinationscale.
Load...
LoadsthePS60Editor/Plug‐InEditordatathatwasprevi‐
ouslysavedonthecomputer.
Save...
SavesdatafromthePS60Editor/Plug‐InEditortoyourcom‐
puterasafile.
Note:Thesefunctionsloadorsavethedataas dedicatedfiles
fortheeditorapplication.
Receive All
ReceivesalldatafromthePS60dataintotheeditor.
Transmit All
TransmitsalldatainthePS60Editor/Plug‐InEditortothe
PS60andwritesitintointernalmemory.
Receive Global Setting
ReceivestheglobalsettingsofthePS60intothePS60Editor/
Plug‐InEditor.
Transmit Global Setting
TransmitstheglobalsettingsofthePS60Editor/Plug‐InEdi‐
tortothePS60.
Import
LoadsPCGdatafromthePS60intothePS60Editor/Plug‐In
Editor.
Export
DatacreatedinthePS60Editor/Plug‐InEditorcanbesaved
asPCGdataforthePS60.
Save as Default
Writes(saves)theglobalmodeSoftwareSetupsettingsof
theeditorasthedefaultsettingsthatwillbeusedwhenyou
startuptheeditor.
Note:Theseutilitiescanbeselectedonlyintheeditor’s
globalmodeSoftwareSetuppage.
Select Auto Load File
IntheSoftwareSetuppage,use“Loaddatafileautomati‐
cally”toselectthedesiredfile.
Pleasesee“Loaddatafileautomaticallyatstartingup”on
page 69.
All Sound Off
Dependingonthehostapplication,ʺhungʺnotesmayoccur
whileusingthehostʹsfunctions.Ifthishappens,pleaseuse
theʺAllSoundOffʺcommand.