Korg PS60 - Filter Modulation

Program Edit
40
When“IntensitytoA”issettoapositive(+)value,theEG’s
effectwillmatchitsshape.WhentheEGrisesabove0,the
cutofffrequencywillincrease.
Withnegative(–)values,theeffectwillbeintheopposite
direction;whentheEGrisesabove0,thefiltercutoffwill
decrease.
Velocity to B [–99...+99]
ThisletsyouusevelocitytoscaletheamountoftheFilter
EGappliedtoFilterB.Formoreinformation,pleasesee
“VelocitytoA,”above.
Intensity to B [–99...+99]
ThiscontrolstheinitialeffectoftheFilterEGonFilterB’s
cutofffrequency,beforeanyvelocityorAMSmodulation.
Formoreinformation,pleasesee“IntensitytoA,”above.
AMS Source (Filter EG) [List of AMS Sources]
ThisselectsanyAMSmodulationsourcetoscalethe
amountoftheFilterEGappliedtoFiltersAandB.Thetwo
filtersshareasingleAMSsource,withseparateintensity
settings.Otherwise,theAMSmodulationwillworkinthe
samewayastheVelocitytoAparameter,describedabove.
ForalistofAM
Ssources,pleasesee“A l t e r n a t e Modulation
Source(AMS)”onpage 121.
AMS Int to A [–99...+99]
ThiscontrolsthedepthanddirectionoftheEGAMSmodu‐
lationforFilterA.
AMS Int to B [–99...+99]
ThiscontrolsthedepthanddirectionoftheEGAMSmodu‐
lationforFilterB.
Filter Modulation
ThissectionletsyouassignanytwoAMSsourcestocontrol
FilterA,andanothertwoAMSsourcestocontrolFilterB.
ThismodulationisaddedtothebasicFilterAandBcutoff
frequencies,as setontheFilter1page.
Filter A:
AMS1 Source [List of AMS Sources]
ThisselectsthefirstmodulationsourceforcontrollingFilter
A’ scutofffrequency.ForalistofAMS sources,pleasesee
“A l t e r n a t e ModulationSource(AMS)”onpage 121.
AMS1 Intensity [–99...+99]
ThiscontrolsthedepthanddirectionofAMS1.
AMS2 Source [List of AMS Sources]
Thisselectsthesecondmodulationsourceforcontrolling
FilterA’scutofffrequency.ForalistofAMSsources,please
see“A l t e r n a t e ModulationSource(AMS)”onpage 121.
AMS2 Intensity [–99...+99]
ThiscontrolsthedepthanddirectionofAMS2.
Filter B:
FilterBisavailableifthe“Routing”isSerialorParallel.Oth‐
erwise,allparametersinthissectionareunavailable,and
cannotbeedited.
ThefilterBparametersarethesameasforfilterA()“Filter
A”onpage 36).