Kurzweil Flash Play PC4 - Page 284

Song Mode
The TRACK Page
8-35
When the Change function is applied with Mode set to PosRamp, the selected velocity or
controller values will gradually change over the region of time, dened by the locations set
for the From and To parameters, from the original value to the new value determined by the
Scale and Oset settings. e rst events being modied within the region will have little or
no change from their original values. e amount of Scale and Oset applied will increase as
the song approaches the Bar and Beat dened in the To parameter, where the full amount of
Scale and Oset will be applied.
You can set Mode to NegRamp to achieve the opposite dynamic eect of PosRamp.
NegRamp works in the same way, but the amount of Scale and Oset applied will decrease
from the full amount to little or no change as the song approaches the bar, beat, and tick
dened in the To parameter.
Remap
Use the Remap function to apply values from existing controller events to another controller
number.
Old: Controller List (0 to 120)
Use the “Old” parameter to select the Controller that you wish to remap. is Controller
must already have events on the current track in order to apply it to the “New” Controller
type. e old events will be deleted.
New: Controller List (0 to 120)
Use the “New” parameter to select the Controller that will use the existing values from the
“Old” Controller.