4-40 LeeBoy 6150 Conveyor Paver
Operation
Power Crown Option
The Power Crown option automatically adjusts the posi-
tive or negative crown as needed.
The power crown option can only be used on the right
screed extension. The power crown selector switch is
located beside the electric heat control box. (Figure
4-83)
To use the power crown feature:
1. Turn power crown selector switch ON to activate
the power crown. (Figure 4-83)
2. The right extension switch on the remote control
box now controls the power crown feature.
3. Turn the power crown selector switch OFF when not
using this feature in order to extend/retract the right
screed extension.
Power
Crown
Switch
Figure 4-83. Power Crown Option
To Next Page
Loading...
