LeeBoy 6150 - Lubrication

5-6 LeeBoy 6150 Conveyor Paver
Maintenance
The lubrication intervals outlined
below are based upon average operating conditions.
If working in severe, dusty or wet conditions, more
frequent lubrication may be necessary.
Lubrication
Proper lubrication is necessary to maintain the
LeeBoy Model 6150 Conveyor Paver at top efciency.
Periodic lubrication of moving parts is an essential
part of preventive maintenance that minimizes risk for
mechanical failures. Always wipe dirt and old grease
away before applying new lubrication.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Table 5-2. Lubrication Points Schedule
ITEM
NO.
TYPE
LUBE
DESCRIPTION AND LOCATION
INTERVAL
A Grease With Shell Avania EP Grease 2 or Equivalent
B Spray with Release or Chain Lube Agent
C Spray with Anti-Seize Lubricant
1 A Front wheel king pins (see next page). Weekly
2 A Conveyor grease block (5 grease ttings). Daily
3 Gear Oil Check torque hub oil level (see next page). Weekly
4 A
Endgate depth screw (both sides). Grease rst in locked position, unlock, and
turn 180° to grease.
Weekly
5 A Screed pivot points. Weekly
6 A Tilt screws (both sides). Weekly
7 C Extension slides. Weekly
8 A Auger bearings and end mount (both sides). Daily
9 A
Flange bearing and tting on ight screw and ange bearing on T-handle of
extensions (both sides).
Weekly
10 A Main ight screws ball socket and nut. Weekly
11 B Screed crown on chain. Weekly
12 B Conveyor chains. Daily
13 B Auger (and auger chains). Daily
14 B Spray all parts of paver that come into contact with asphalt. Daily