Lenovo System x3650 M5 - Removing the Fan Cage Assembly

Figure107.DIMMinstallation
Step6.Touchthestatic-protectivepackagethatcontainstheDIMMtoanyunpaintedmetalsurfaceonthe
outsideoftheserver.Then,removetheDIMMfromthepackage.
Step7.TurntheDIMMsothatthealignmentslotaligncorrectlywiththealignmenttab.
Step8.InserttheDIMMintotheconnectorbyaligningtheedgesoftheDIMMwiththeslotsattheendsof
theDIMMconnector(see“System-boardoptional-deviceconnectors”onpage32
forthelocations
oftheDIMMconnectors).
Step9.FirmlypresstheDIMMstraightdownintotheconnectorbyapplyingpressureonbothendsofthe
DIMMsimultaneously.TheretainingclipssnapintothelockedpositionwhentheDIMMisfirmly
seatedintheconnector.
Note:IfthereisagapbetweentheDIMMandtheretainingclips,theDIMMhasnotbeencorrectly
inserted;opentheretainingclips,removetheDIMM,andthenreinsertit.
Step10.Reconnectthepowercordsandanycablesthatyouremoved.
Step11.Replacetheairbaffle(see“Replacingtheairbaffle”onpage153).
Note:ClosealltheretainingclipsevenforslotswithoutDIMMsinstalledbeforereplacingthe
airbaffle.
Step12.Replacethetopcover(see“Replacingthetopcover”onpage151).
Step13.Turnontheperipheraldevicesandtheserver.
Removingthefancageassembly
Usethisinformationtoremovethefancageassembly.
Toreplacesomecomponentsortocreateworkingroom,youmighthavetoremovethefancageassembly.
Note:Toremoveorinstallafan,itisnotnecessarytoremovethefancage.See“Removingahot-swapfan”
onpage180and“Replacingahot-swapfan”onpage181.
Toremovethefancageassembly,completethefollowingsteps:
178LenovoSystemx3650M5InstallationandServiceGuide