1
3
4
4
SD 1
SD 2
Alignment pin
Connector
SD adapter
Figure215.SDadapterinstallation
Step8.Seethehttp://www.ibm.com/support/entry/portal/docdisplay?lndocid=MIGR-5096845,that
comeswiththeoption,forinformationabouthowtoconfiguretheSDadapter.
Step9.Turnontheperipheraldevicesandtheserver.
RemovingtheLCDsysteminformationdisplaypanel
UsethisinformationtoremovetheLCDsysteminformationdisplaypanel.
Note:TheLCDsysteminformationdisplaypanelisavailableonlyonsomemodels.
RemovingtheLCDpanelassemblyona3.5-inchmodel
ToremovetheLCDpanelassemblyona3.5-inchmodel,completethefollowingsteps.
1.Readthesafetyinformationthatbeginson“Safety”onpagevand“Installationguidelines”onpage297.
2.Turnofftheserverandperipheraldevicesanddisconnectthepowercordsandallexternalcables,if
necessary.
3.Removethetopcover(see“Removingthetopcover”onpage149).
4.Removethefancageassembly(See“Removingthefancageassembly”onpage178).
5.PullupthereleaselatchslightlyandslidetheLCDpanelassemblyoutoftheserver.
Chapter5.Installing,removing,andreplacingcomponents261