Lenovo System x3650 M5 - Removing an EIA Assembly

SAS signal cable
3.5" hard disk drive cage
Figure154.3.5-inchreartwohard-disk-drivekitcablerouting
Step6.PressdowntheHDDkitfirmlyuntiltheHDDkitisfullyseatedintheconnectoronthesystemboard.
Step7.Replacethetopcover(see“Replacingthetopcover”onpage151).
Step8.Slidetheserverintotherack.
Step9.Reconnectthepowercordsandanycablesthatyouremoved.
Step10.Turnontheperipheraldevicesandtheserver.
RemovinganEIAassembly
UsethefollowinginstructionstoremoveanEIAassemblyfor2.5-inchand3.5-inchmodels.
Note:TheEIAassemblyisavailableonlyonsomemodels.
2.5-inchmodel
TherearetherightEIAassemblyandtheleftEIAassemblyontheserver,usethefollowingstepstoremove
them.
FortherightEIAassembly
1.Readthesafetyinformationthatbeginson“Safety”onpagevand“Installationguidelines”onpage297.
Chapter5.Installing,removing,andreplacingcomponents213