2.Makesurethewirecablesareroutedintheproperlocationswithoutblockingtheretention
bracketsinstallation.
Step9.Reinstallthetopcover(see“Replacingthetopcover”onpage151).
Step10.Slidetheserverintotherack.
Step11.Reconnectthepowercordsandallexternalcables,andturnontheserverandperipheraldevices.
Removingthereartwohard-disk-drivekit
Usethisinformationtoremovethereartwohard-disk-drivekit.
Seehttp://www.lenovo.com/serverproven/foralistofharddiskdrivesthatyoucanusewiththeserver.
Toremovethereartwohard-disk-drivekit,completethefollowingsteps:
Step1.Readthesafetyinformationthatbeginsonpage“Safety”onpagevand“Installationguidelines”on
page297
.
Step2.Turnofftheserverandperipheraldevices,anddisconnectthepowercordandallexternalcables.
Step3.Removethetopcover(see“Removingthetopcover”onpage149).
Step4.Graspthekitatthefrontandtherearedgeandliftituptoremovefromtheserver.Placethekit
onaflat,static-protectivesurface.
•2.5-inchreartwohard-disk-drivekitremoval
2.5-inch rear two
hard-disk-drive kit 1
Figure143.2.5-inchreartwohard-disk-drivekitremoval
•3.5-inchreartwohard-disk-drivekitremoval
Chapter5.Installing,removing,andreplacingcomponents207