Figure213.Coin-cellbatteryinstallation
b.Pressthebatterydownintothesocketuntilitclicksintoplace.Makesurethatthebatteryclip
holdsthebatterysecurely.
c.Ifyouremovedarubbercoverfromthebatteryholder,useyourfingerstoinstallthebattery
coverontopofthebatteryconnector.
Step7.Reinstalltheriser-cardassembly2(see“Replacingariser-cardassembly”onpage188),if
necessary.
Step8.Installthetopcover(see“Replacingthetopcover”onpage151).
Step9.Slidetheserverintotherack.
Step10.Reconnecttheexternalcables;then,reconnectthepowercordsandturnontheperipheraldevices
andtheserver.
Step11.StarttheSetupUtilityandresettheconfiguration.
•Setthesystemdateandtime.
•Setthepower-onpassword.
•Reconfiguretheserver.
See“UsingtheSetupUtility”onpage52fordetails.
RemovingtheSDadapter
UsethisinformationtoremovetheSDadapter.
ToremovetheSDadapter,completethefollowingsteps:
Step1.Readthesafetyinformationthatbeginson“Safety”onpagevand“Installationguidelines”on
page297
.
Step2.Removethetopcover(see“Removingthetopcover”onpage149).
Step3.Removetheriser-cardassembly2,ifneeded(See“Removingariser-cardassembly”onpage186).
Step4.Loosentwoscrews.
Step5.LifttheSDadapteroutoftheserver.
Step6.RemovetheSDcards.
Chapter5.Installing,removing,andreplacingcomponents259