Dedicated slotless
RAID connector
Retention bracket
Retention bracket
Figure123.DedicatedslotlessRAIDcontrollerinstallation
Step7.Routethebackplanesignalcables.(See“2.5-inchharddiskdrivecableconnection”onpage136
and“3.5-inchharddiskdrivecableconnection”onpage146).
Step8.Connectthesignalcablestothecontroller.
Step9.Reconnectanycablesthatyouremoved.
Step10.Replacethetopcover(see“Replacingthetopcover”onpage151).
Step11.Slidetheserverintotherack.
Step12.Reconnectthepowercordsandanycablesthatyouremoved.
Removinganadapter
Usethisinformationtoremoveanadapter.
Removinganadapterinariser-cardassembly
Usethisinformationtoremoveanadapter.
Thistopicdescribesremovinganadapterfromaexpansionslotinariser-cardassembly.Theseinstructions
applytoPCIadapterssuchasvideographicadaptersandnetworkadapters.
Thefollowingillustrationshowsthelocationsoftheadapterexpansionslotsfromtherearoftheserver.
Slot 1
Slot 2
Slot 3
Slot 6
Slot 7
Slot 8
Slot 4 Slot 5
Figure124.PCIriser-cardadapterexpansionslotlocations
192LenovoSystemx3650M5InstallationandServiceGuide