Lenovo System x3650 M5 - Installing a 8 X 2.5-Inch Hot-Swap HDD Assembly Kit

SAS signal cable
Power / configuration
cable
Figure273.8x3.5-inchsimple-swapharddiskdrivewithhardwareRAIDcabling
Step10.Replacethefancageandfansifyouremovedthem(see“Replacingthefancageassembly”on
page179
and“Replacingahot-swapfan”onpage181).
Step11.Reinstalltheharddiskdrives(see“Replacingahot-swapharddiskdrive”onpage159).
Step12.Installthetopcover(see“Replacingthetopcover”onpage151).
Step13.Slidetheserverintotherack.
Step14.Reconnectthepowercordsandanycablesthatyouremoved.
Step15.Turnontheperipheraldevicesandtheserver.
Installinga8x2.5-inchhot-swapHDDassemblykit
Usethisinformationtoinstalla8x2.5-inchhot-swapHDDassemblykit.
YoucaninstallaLenovoSystemx3650M58x2.5-inchhot-swapHDDassemblykittoaddeightadditional
2.5-inchhot-swapharddiskdrivesintheserver.Seehttp://www.lenovo.com/serverproven/foralist
ofsupportedoptionaldevices.Toordera8x2.5-inchhot-swapHDDassemblykit,contactyoursales
representativeorreseller.
The8x2.5-inchhot-swapHDDassemblykitcontainsthefollowingcomponents:
•Eight2.5-inchHDDfillers
•Onehot-swapbackplane
304LenovoSystemx3650M5InstallationandServiceGuide