Lenovo System x3650 M5 - Updating the DMI;SMBIOS Data

TheIMM2account(1of12accounts).ThedefaultvalueisUSERID.
imm_password
TheIMM2accountpassword(1of12accounts).ThedefaultvalueisPASSW0RD(with
azero0notanO).
ExamplethatdoesnotusetheuserIDandpassworddefaultvalues:
oneclicongsetSYSTEM_PROD_DATA.SYsInfoUUID<uuid_value>
[immimm_user_id:imm_password@imm_internal_ip]
ExamplethatdoesusetheuserIDandpassworddefaultvalues:
oneclicongsetSYSTEM_PROD_DATA.SysInfoUUID<uuid_value>
•Bootablemedia:
YoucanalsobuildabootablemediumusingtheapplicationsavailablethroughtheToolsCenter
Websiteathttps://support.lenovo.com/us/en/documents/LNVO-CENTER.Fromthe
ToolsCenterpage,scrolldownfortheavailabletools.
Step5.RestarttheIMM.
Step6.Restarttheserver.
UpdatingtheDMI/SMBIOSdata
TheDesktopManagementInterface(DMI)mustbeupdatedwhenthesystemboardisreplaced.Usethe
LenovoToolsCenterSuiteCLI(OneCLI)toupdatetheDMIintheUEFI-basedserver.OneCLIisanonline
toolthatsupportsseveraloperatingsystems.Makesurethatyoudownloadtheversionforyouroperating
system.YoucandownloadOneCLIfromtheLenovoWebsite.TodownloadOneCLIandupdatetheDMI,
dothefollowing:
Note:ChangesaremadeperiodicallytotheLenovoWebsite.Theactualproceduremightvaryslightly
fromwhatisdescribedinthisdocument.
Step1.Gotohttps://support.lenovo.com/us/en/documents/LNVO-TCLI.Then,findanddownloadthe
OneCLIversionforyouroperatingsystem.
Step2.OneCLIsetstheDMIintheIMM2.SelectoneofthefollowingmethodstoaccesstheIMM2to
settheDMI:
•Onlinefromthetargetsystem,suchasLANorkeyboardconsolestyle(KCS)access
•Remoteaccesstothetargetsystem(LANbased)
•BootablemediumcontainingASU(LANorKCS,dependinguponthebootablemedia)
Step3.CopyandunpacktheOneCLIpackage,whichalsoincludesotherrequiredfiles,totheserver.
MakesurethatyouunpacktheOneCLIandtherequiredfilestothesamedirectory.Inadditionto
theapplicationexecutable(OneCLIorOneCLI64),thefollowingfilesarerequired:
•ForWindowsbasedoperatingsystems:
–ibm_rndis_server_os.inf
–device.cat
•ForLinuxbasedoperatingsystems:
–cdc_interface.sh
Step4.AfteryouinstallOneCLI,typethefollowingcommandstosettheDMI:
oneclicongsetSYSTEM_PROD_DATA.SysInfoProdName<m/t_model>[access_method]
oneclicongsetSYSTEM_PROD_DATA.SysInfoSerialNum<s/n>[access_method]
oneclicongsetSYSTEM_PROD_DATA.SysEncloseAssetTag<asset_tag>[access_method]
Where:
Chapter2.Configurationinformationandinstructions65