PCI riser-card
assembly 2
PCI riser-card
bly 1
Shipping bracket for
riser-card assembly
Figure121.Riser-cardassemblyinstallation-full-height,full-lengthadapters
Step6.Replacethetopcover(see“Replacingthetopcover”onpage151).
Step7.Slidetheserverintotherack.
Step8.Reconnectthepowercordsandanycablesthatyouremoved.
Step9.Turnontheperipheraldevicesandtheserver.
RemovingthededicatedslotlessRAIDcontroller
UsethisinformationtoremovethededicatedslotlessRAIDcontroller.
ThededicatedslotlessRAIDcontrollercanbeinstalledinthededicatedconnectoronthesystemboard(see
“System-boardinternalconnectors”onpage29forthelocationoftheconnectors).
ToremovethededicatedslotlessRAIDcontroller,completethefollowingsteps:
Step1.Readthesafetyinformationthatbeginson“Safety”onpagevand“Installationguidelines”on
page297.
Step2.Turnofftheserverandperipheraldevicesanddisconnectthepowercordsandallexternalcables,
ifnecessary.
Step3.Removethetopcover(see“Removingthetopcover”onpage149).
Step4.Disconnectthesignalcablesfromtheconnectorsonthecontrollerandnotetheirlocations.
Step5.1Presstheretentiontabsawayfromthecontroller;then,slightlyliftuptherearofthecontroller,
and2pullitoutoftheconnectoronthesystemboard.
190LenovoSystemx3650M5InstallationandServiceGuide