Lenovo System x3650 M5 - Removing a USB Embedded Hypervisor Flash Device

3
2
1
Figure207.3.5-inchhot-swapharddiskdrivebackplaneinstallation
Step8.Connectthesignalandpower-configurationcablestothebackplaneandthesystemboard.See
“3.5-inchharddiskdrivecableconnection”onpage146formoreinformation.
Step9.Reinstalltheharddiskdrivesandfillerpanels(see“Replacingasimple-swapharddiskdrive”on
page162).
Step10.Replacethefancageassemblyandfansifyouremovedthem(see“Replacingthefancage
assembly”onpage179and“Replacingahot-swapfan”onpage181).
Step11.Installthetopcover(see“Replacingthetopcover”onpage151).
Step12.Slidetheserverintotherack.
Step13.Reconnectthepowercordsandanycablesthatyouremoved.
Step14.Turnontheperipheraldevicesandtheserver.
RemovingaUSBembeddedhypervisorflashdevice
UsethisinformationtoremoveaUSBembeddedhypervisorflashdevice.
ToremoveaUSBhypervisorflashdevice,completethefollowingsteps:
Step1.Readthesafetyinformationthatbeginson“Safety”onpagevand“Installationguidelines”on
page297.
Step2.Turnofftheserverandperipheraldevicesanddisconnectthepowercords.
Step3.Removethetopcover(see“Removingthetopcover”onpage149).
Step4.Grasptheflashdeviceandpulltoremoveitfromtheconnector.
Chapter5.Installing,removing,andreplacingcomponents253