Lenovo System x3650 M5 - Installing a Pcie Thermal Solution Kit

Signal cables
Power connector 3
Power connector 1
Power connector 2
Figure297.Cablerouting
Notes:
1.Forthepowercableconnection,theNVMebackplanecanonlyconnecttothepower
connector3.
2.Theremightbe3or4powerconnectorsonthesystemboarddependingonyour
configuration.However,thisdifferencewillnotaffectthecablerouting.Followthefollowing
illustrationstocompleteyourcablerouting.
Step14.Ifyouremovedthefancage,installitbacktotheserver.(See“Replacingthefancageassembly”
onpage179
).
Step15.Inserttheharddiskdrivesandthefillerstherestofthewayintothebays.(See“Replacinga
hot-swapharddiskdrive”onpage159).
InstallingaPCIethermalsolutionkit
UsethisinformationtoinstallaPCIethermalsolutionkit.
Note:IfyouareinstallingtheDualPort10GB-TEthernetDaughterCard(Optionnumberis00D1994)in
theserver,youhavetopurchaseandinstallaLenovoSystemx3650M5PCIethermalsolutionkit.See
http://www.lenovo.com/serverproven/foralistofsupportedoptionaldevices.ToorderaPCIethermal
solutionkit,contactyoursalesrepresentativeorreseller.
ThePCIethermalsolutionkitcontainsoneairbaffle.
Chapter5.Installing,removing,andreplacingcomponents325