Lenovo System x3650 M5 - Removing a RAID Adapter Battery;Flash Power Module

Step6.Aligntheadapterwiththeslotonthereartwohard-disk-drivekit.
Step7.3Presstheadapterfirmlyintotheslotonthereartwohard-disk-drivekit.
1
3
2
Adapter
Adapter connector
Expansion-slot cover
Bracket
Rear two hard-disk-drive kit
Figure139.Adapterinstallation
Step8.Connectanyrequiredcablestotheadapter.
Attention:
•Whenyouroutecables,donotblockanyconnectorsortheventilatedspacearoundanyof
thefans.
•Makesurethatcablesarenotroutedontopofcomponentsunderthereartwohard-disk-drive
kit.
•Makesurethatcablesarenotpinchedbytheservercomponents.
Step9.Performanyconfigurationtasksthatarerequiredfortheadapter.
Step10.Replacethereartwohard-disk-drivekitintheserver(see“Replacingthereartwohard-disk-drive
kit”onpage208).
Step11.Reinstallthetopcover(see“Replacingthetopcover”onpage151).
Step12.Slidetheserverintotherack.
Step13.Reconnectthepowercordsandanycablesthatyouremoved.
Step14.Turnontheperipheraldevicesandtheserver.
RemovingaRAIDadapterbattery/flashpowermodule
UsethisinformationtoremoveaRAIDadapterbattery/flashpowermodule.
IfaRAIDadapterbattery/flashpowermoduleisinstallednearthefancageandyouneedtoreplaceit,
completethefollowingsteps:
Step1.Readthesafetyinformationthatbeginson“Safety”onpagevand“Installationguidelines”on
page297.
Step2.Turnofftheserverandperipheraldevicesanddisconnectallpowercords.
Step3.Removethetopcover(see“Removingthetopcover”onpage149).
Step4.Disconnectthebattery/flashpowermodulecablefromtheRAIDadapterbattery/flashpower
moduleconnector.
204LenovoSystemx3650M5InstallationandServiceGuide