Front USB / operator
information panel cable
Figure189.Cableconnection
11.Replacethefancageassembly(see“Replacingthefancageassembly”onpage179).
12.Replacethetopcover(see“Replacingthetopcover”onpage151).
13.Slidetheserverintotherack.
14.Reconnectthepowercordsandanycablesthatyouremoved.
15.Turnontheperipheraldevicesandtheserver.
FortheleftEIAassembly
1.Readthesafetyinformationthatbeginson“Safety”onpagevand“Installationguidelines”onpage297.
2.Turnofftheserverandperipheraldevices,anddisconnectthepowercordandallexternalcables.
3.Removethetopcover(see“Removingthetopcover”onpage149).
4.Removethefancageassembly(see“Removingthefancageassembly”onpage178).
5.Routethecableintotheslot.
Figure190.Cablerouting
Chapter5.Installing,removing,andreplacingcomponents233
To Next Page
Loading...
