Lenovo System x3650 M5 - Page 278

0000000000000000000
LCD panel connector
Operator information /
LCD panel connector
Operator information /
LCD panel cable
Figure225.LCDpanelassemblycablerouting
Note:ToconnecttheLCDpanelassemblycableonthesystemboard,pressevenlyonthecable.
Pressingononesideofthecablemightcausedamagetothecableorconnector.
11.Replacethetopcover(see“Replacingthetopcover”onpage151).
12.Slidetheserverintotherack.
13.Reconnectthepowercordsandanycablesthatyouremoved.
14.Turnontheperipheraldevicesandtheserver.
ReplacingtheLCDsysteminformationdisplaypanelona2.5-inchmodel
ToinstalltheLCDsysteminformationdisplaypanelintoamediacagethatispre-configuredwithoutaLCD
systeminformationdisplaypanelona2.5-inchmodel,completethefollowingsteps.
1.Readthesafetyinformationthatbeginson“Safety”onpagevand“Installationguidelines”onpage297.
2.Turnofftheserverandperipheraldevicesanddisconnectthepowercordsandallexternalcables,if
necessary.
3.Removethetopcover(see“Removingthetopcover”onpage149).
4.Removethefancageassembly“Removingthefancageassembly”onpage178).
5.Removethemediacage(see“Removingthemediacage(alsocalledlightpathLCDoperationpanel
assembly)”onpage182),
6.AseparatebezelisneededifyourmediacagehasabezelwithouttheopeningandbuttonsfortheLCD
panel,Toremovethemediacagebezel,completethefollowingsteps:
a.Disengagethethreesnapsonthemediacagebezelfromthemediacage.Thefollowingillustration
showsthelocationofthreesnaps.
266LenovoSystemx3650M5InstallationandServiceGuide