Thumb screws
System board handles
Figure269.Systemboardinstallation
Step5.Reconnecttothesystemboardthecablesthatyoudisconnectedinstep13of“Removingthe
systemboard”onpage292(see“Internalcableroutingandconnectors”onpage135).
Step6.(Trainedtechnicianonly)Installthemicroprocessorandheatsink(see“Replacingamicroprocessor
andheatsink”onpage281
).
Step7.Installthememorymodules(see“Installingamemorymodule”onpage171).
Step8.Ifnecessary,installthevirtualmediakey.
Step9.Installthecoin-cellbattery(see“Replacingthecoin-cellbattery(alsocalledCMOSbattery)”on
page257).
Step10.InstallthePCIriser-cardassembliesandadapters,ifanywereinstalled(see“Replacinganadapter”
onpage196and“Replacingariser-cardassembly”onpage188).
Step11.Installtheairbaffle(see“Replacingtheairbaffle”onpage153).
Step12.Installthefancageassembly(see“Replacingthefancageassembly”onpage179).
Step13.Installthetopcover(see“Replacingthetopcover”onpage151).
Step14.Pushthepowersuppliesbackintotheserver.
Step15.Slidetheserverintotherack.
Step16.Reconnectthepowercordsandanycablesthatyouremoved.
Step17.Turnontheperipheraldevicesandtheserver.
Step18.StarttheSetupUtilityandresettheconfiguration.
•Setthesystemdateandtime.
•Setthepower-onpassword.
•Reconfiguretheserver.
See“UsingtheSetupUtility”onpage52formoredetails.
Step19.EitherupdatetheserverwiththelatestRAIDfirmwareorrestorethepre-existingfirmwarefroma
disketteorCDimage.
Step20.UpdatetheUUID(see“UpdatingtheUniversalUniqueIdentifier(UUID)”onpage63).
Step21.UpdatetheDMI/SMBIOS(see“UpdatingtheDMI/SMBIOSdata”onpage65).
296LenovoSystemx3650M5InstallationandServiceGuide