Lenze 8200 vector series Mounting Instructions

Safety instructions
Application as directed
2

106
EDK82EV903 DE/EN/FR 5.1
2 Safety instructions
2.1 Application as directed
8200 vector frequency inverters and accessories
ƒ are components
– for the control of variable speed drives with asynchronous standard motors,
reluctance motors, PM synchronous motors with asynchronous damper cage.
– for mounting into a machine.
– for the assembly with other components to a machine.
ƒ may only be actuated under the operating conditions specified in this
documentation.
ƒ comply with the protection requirements of the "Low voltage" EC Directive.
ƒ are not machines in terms of the "Machines" EC Directive.
ƒ are not household appliances, but are solely designed as components for
re−utilisation for commercial use or professional use in terms of EN 61000−3−2.
The drive system (frequency inverter and drive) corresponds to the "Electromagnetic
compatibility" EC Directive if it is installed in accordance with the specifications of the
CE−typical drive system.
Any other use shall be deemed as inappropriate!

Lenze 8200 vector series Specifications

General

Category	DC Drives
Overload capacity	150% for 60 seconds
Protection class	IP20
Mains voltage	380V to 480V AC
Control method	Vector control
Communication options	CANopen
Protection features	Overcurrent, overvoltage, undervoltage, overtemperature, short circuit
Humidity	≤ 95% relative humidity, non-condensing
Series	8200 vector