Lenze EVS 9300 series - Display in Global Drive Control

During operation
Status indications
6-2
l
EDSVS9332S-C EN 3.0
6.1.3 Display in Global Drive Control
1. Click on the ”Control” button in the ”Basic settings” dialog box.
2. Click on the ”Diagnostics” button in the ”Control” dialog box.
1
2
3
4
5
6
7
8
9
11
12
13
14
15
10
Fig. 6-1 ”Diagnosis 93xx” dialog box
1Typeoffault
2 Actual speed
3 Actual motor voltage
4 Actual motor current
5 Motor torque
6DCbusvoltage
7 Heatsink temperature
8 Motor temperature
9Driveload
10 Reset fault
11 Time for how long the supply voltage was applied
12 Time for how long the controller was enabled
13 Actual fault with time and frequency of the fault.  10-4
14 Fault history with time and frequency of the fault.  10-4
15 Reset history buffer.  10-4