Lenze EVS 9300 series - Menu Structure

Parameter setting
Parameter setting using the keypad
7-11
l
EDSVS9332S-D11 EN 3.0
7.2.9 Menu structure
For easy operation, the codes are clearly arranged in function-related menus:
Main menu Submenus
Description
Display Display
D
e
s
c
r
i
p
t
i
o
n
USER menu Defined codes in C0517
Code list All available codes
ALL All available codes in ascending order (C0001 ... C7999)
PS 1 Codes in parameter set 1 (C0001 ... C1999)
PS 2 Codes in parameter set 2 (C2001 ... C3999)
PS 3 Codes in parameter set 3 (C4001 ... C5999)
PS 4 Codes in parameter set 4 (C6001 ... C7999)
Load/Store Parameter set management
Parameter set transfer, restore delivery status
Diagnostic Diagnostics
Actual info Display codes in order to monitor drive
History Error analysis with history buffer
Short setup Quick configuration of predefined applications
Configuration of the user menu
The predefined applications depend on the type of the basic controller (frequency inverter, servo inverter, position controller, ...)
Main FB Configuration of main function blocks
NSET Setpoint processing
NSET-JOG Fixed setpoints
NSET-RAMP1 Ramp generator
MCTRL Motor control
DFSET Digital frequency processing
DCTRL Internal control
Terminal I/O Linkage of inputs and outputs with internal signals
AIN1 X6.1/2 Analog input 1
AIN2 X6.3/4 Analog input 2
AOUT1 X6.62 Analog output 1
AOUT2 X6.63 Analog output 2
DIGIN Digital inputs
DIGOUT Digital outputs
DFIN Digital frequency input
DFOUT Digital frequency output
State bus State bus
Controller Configuration of internal control parameters
Speed Speed controller
Current Current controller or torque controller
Phase Phase controller
Motor/Feedb. Input of motor data, configuration of speed feedback
Motor adj Motor data
Feedback Feedback system configuration
Monitoring Monitoring function configuration
LECOM/AIF Configuration of operation with communication modules
LECOM A/B Serial interface
AIF interface Process data
Status word Display of status words