During operation
Status indications
6-3
l
EDSVS9332S-C EN 3.0
6.1.4 Actual value display via codes
You can read different actual values using the following codes:
Code Meaning
C0051 Absolute actual speed [rpm]
C0052 Absolute motor voltage [V]
C0053 Absolute DC bus voltage [V]
C0054 Absolute motor current [A]
C0060 Rotor position [Inc/rev]
C0061 Heatsink temperature [°C]
C0063 Absolute motor temperature [°C]
Display only if the KTY (PTC) is connected via X7 or X8.
C0064 Controller load [%]
Identification
z You can read the software version of the controller under C0099.
z C0093 indicates the controller type.
To Next Page
Loading...