Lenze EVS 9300 series - Speed Control (C0005 = 1000)

Application examples
12.1 Speed control (C0005 = 1000)
12-2
L
EDSVS9332S-K EN 3.0
12.1 Speed control (C0005 = 1000)
Tip!
Themost important settings canbe found in themenu:”Short Setup / Speed mode” of the XTkeypad
or in the menu ” Short setup / Speed mode” in Global Drive Control.
Enter motor type (contains all nameplate data of the motor)
C0173 xxx Enter UG limit (mains voltage)
C0086 000 Enter motor data manually
Enter maximum motor current
C0022 xxxA Determine Imax
Enter controller configuration
C0005 1000 Select speed control
C0025 xxx Enter feedback system
Speed setpoint settings
C0011 xxx rpm Determine max. speed
C0012 xxx s Set acceleration time
C0013 xxx s Set deceleration time
C0105 xxx s Set QSP deceleration time
Application parameters
C0070 xxx Vp n-controller
C0071 xxx Tn n-controller
Save parameters
C0003 xxx Save all parameters