Configuration
Configuration with Global Drive Control
8-1
L
EDSVS9332S-D11 EN 3.0
8 Configuration
In practice, every application requires an adjusted, controller-internal configuration realised with a
huge number of different function blocks which must be linked in a suitable way.
8.1 Configuration with Global Drive Control
With Global Drive Control (GDC), Lenze offers an easy-to-understand, clearly-laid-out and
convenient tool for the configuration of your specific drive task.
Function block library
GDC provides an easy-to-read library of available function blocks (FB). GDC also displays the
complete assignment of an FB.
Signal configuration
The signal configuration is done with only one dialog box. It is a convenient way
z to display every FB as a block diagram.
z to see the assignment of all signal inputs at a glance.
z to enter the FB in the processing table.
z to print your signal configuration.
Terminal assignment
Freely assignable terminals can be configured using two dialog boxes:
z Dialog box - to link digital inputs and outputs.
z Dialog box - to link analog inputs and outputs.
To Next Page
Loading...