Lenze EVS 9300 series - Control of the Drive Controller (DCTRL)

Function library
Function blocks
9.2.24 Control of the drive controller (DCTRL)
9-92
L
EDSVS9332S-D11 EN 3.0
9.2.24 Control of the drive controller (DCTRL)
Purpose
Controls the controllers to take over specified states (e.g. trip, trip reset, quick stop or controller
inhibit).
fb_dctrl
C135.B3
AIF-CTRL.B3
CAN-CTRL.B3
³1
C0870/2
DCTRL-CINH1
C0878/1
C0870/1
C0136/1
C0135
C0871
DCTRL-TRIP-SET
C135.B8
AIF-CTRL.B8
CAN-CTRL.B8
³1
C135.B9
AIF-CTRL.B9
CAN-CTRL.B9
³1
C135.B10
AIF-CTRL.B10
CAN-CTRL.B10
³1
C135.B11
AIF-CTRL.B11
CAN-CTRL.B11
³1
C0876
DCTRL-TRIP-RESET
DCTRL
STAT
MCTRL
QSP
DISABLE
TRIP-SET
TRIP-RESET
CINH
DCTRL-CINH2
C0878/2
C0878/3
C0878/4
X5/28
DCTRL-IMP
DCTRL-CINH
DCTRL-WARN
DCTRL-MESS
C0880/1
DCTRL-PAR*1
C0884/1
C0880/2
DCTRL-PAR*2
C0884/2
C0881
DCTRL-PAR-LOAD
C0884/3
DCTRL-PARBUSY
DCTRL-PAR*1-O
DCTRL-PAR*2-O
DCTRL-CW/CCW
DCTRL-NACT=0
DCTRL-TRIP
DCTRL-RDY
DCTRL-STAT*1
DCTRL-STAT*2
DCTRL-STAT*4
DCTRL-STAT*8
DCTRL-QSP
³1
DCTRL-FAIL
DCTRL-INIT
16
Fig. 9-57 Control of the controller (DCTRL)